NEC Express5800/GT110e-S Guía de instalación descargar pdf (Pagina 183)

5. Setting Up Windows Server 2003 R2 x64 Edition

Express5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)

183

Chapter 1 Installing Windows

5.4.2

Setting up LAN drivers

(1) Setting link speed

The transfer rate and duplex mode of the network adapter must be the same as those of the switching hub.

Follow the procedure below to specify the transfer rate and duplex mode.

1. Open the Device Manager.

2. Expand Network Adapters, and then double-click the name of the network adapter you want to set.

The properties of the network adapter will be displayed.

3. Select the Advanced tab, and then set the Speed & Duplex values to the same as those of the switching

hub.

4. Click [OK] in the Network Adapter Properties dialog box.

5. Restart the system.

The link speed setting is now complete.

(2) Using N8104-132/133/138

Using N8104-132/133/138 with the server, follow the procedure below to set it.

1. Insert EXPRESSBUILDER DVD into the optical disk drive.

If Autorun Menu appears, close the menu.

Tips

EXPRESSBUILDER DVD is unnecessary if Starter Pack was installed from

Internal Flash Memory. Proceed to the next step.

2. Double-click to the following file.

• When using EXPRESSBUILDER DVD:

Optical disk drive:\024\win\winnt\w2k3amd\lan\pgdyavd_Disable.vbs

• If Starter Pack was installed from Internal Flash Memory:

System drive:\StartPKG\w2k3amd\lan\pgdyavd_Disable.vbs

3. When the following message appears, click [OK].

4. Eject EXPRESSBUILDER DVD from the optical disk drive, and then restart the system.

Setup is now complete.

Configuration Completed

[Option:PopUp RLV Disabled(Action:Done)]

Reboot the system

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 274 275

Sin comentarios

NEC Express5800/GT110e-S Guía de instalación Pagina 183