NEC Express5800/GT110e-S Guía de instalación descargar pdf (Pagina 130)

4. Setting Up Windows Server 2008

press5800/GT-110e, GT-110e-S, R110e-1E Installation Guide (Windows)

130

Chapter 1 Installing Windows

4.5.2

Setting up LAN drivers

(1) Setting link speed

The transfer rate and duplex mode of the network adapter must be the same as those of the switching hub.

Follow the procedure below to specify the transfer rate and duplex mode.

1. Open the Device Manager.

2. Expand Network Adapters, and then double-click the name of the network adapter you want to set.

The properties of the network adapter will be displayed.

3. Select the Advanced tab, and then set the Speed & Duplex values to the same as those of the switching

hub.

4. Click [OK] in the Network Adapter Properties dialog box.

5. Restart the system.

The link speed setting is now complete.

(2) Using N8104-128

Using N8104-128 with the server, iSCSI Offload Engine and EnablePMTUBHDetect must be disabled.

Follow the procedure below to set it.

1. Double-click the Broadcom Control Suite icon on the Control Panel window.

Broadcom Advanced Control Suite starts.

2. Set Filter to ALL VIEW, select Broadcom BCM57711 NetXtreme II 10 GigE # xx under

Explorer View the Adapter xx (BCM57711 A0) - Port x.

3. Tab on Configurations at the right side screen and then expand Resource Reservations.

4. Click the [Configure] button on the Click the button to configure.

The Hardware and Resource Configuration Wizard appears.

5. Remove a checkmark from [iSCSI] under Protocols, if checked.

Select [Next], and then click the [Apply] button.

6. When the following message appears, select [Yes].

7. Complete steps 2 to 6 for each N8104-128 network adapter.

Then, close the Broadcom Advanced Control Suite.

8. Insert EXPRESSBUILDER DVD into the optical disk drive.

If Autorun Menu appears, close the menu.

Tips

EXPRESSBUILDER DVD is unnece

ssary if Starter Pack was installed from

Internal Flash Memory. Proceed to the next step.

Applying the changes will temporarily interrupt the network connection.

The process may take several minutes and the connection will resume

afterwards.

Do you want to continue?

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 274 275

Sin comentarios

NEC Express5800/GT110e-S Guía de instalación Pagina 130