NEC GammaCompMD QA Manual de usuario descargar pdf (Pagina 66)

GammaCompMD QA Client User Manual

Color Temp and Chromaticity Target (x,y)

Shows the target color temperature (K) and color chromaticity (x,

y), when executing calibration. The optimum value is displayed

according to the selected calibration mode and depend on the

display model. If an individual color temperature or chromaticity

target (x,y) setting is required, click the Edit button. The Custom

Chromaticity dialog box, as shown in Figure 43, will be displayed.

Figure 43: Custom Chromaticity dialog box

Chromaticity Tolerance Limits +/- (x,y)

Define the calibration chromaticity (x, y) tolerance limits. The

default value and range that can be set depends on the display

model. When Native or No Change is selected for the calibration

mode, “- - -” is displayed for this item. No Change may not be

selectable, depending on the connected display model.

Target White Luminance

Define the calibration target white luminance. The default value

and range that can be selected depends on the display model.

Luminance Tolerance Limits +/- (x,y)

Define the calibration luminance tolerance limits. The default value

and range that can be selected depends on the display model.

Uniformity Control

Switch the uniformity correction capability of the display between

ON and OFF. This is applied immediately by clicking the Apply or

OK button regardless of whether or not calibration is executed. This

option is grayed out for display models which do not support this

feature.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 181 182

Sin comentarios

NEC GammaCompMD QA Manual de usuario Pagina 66