NEC SigmaBlade AD106a Guía de usuario descargar pdf (Pagina 37)

Setting Up Your Storage and I/O Blade 3-3

INSTALLING THE STORAGE AND I/O BLADE

Install the Storage and I/O Blade in the dedicated Blade Enclosure. The slot to install the Storage

and I/O Blade must be the one adjacent to the CPU blade to which the Storage and I/O Blade is to

be connected. See "Installation Order" described later in this chapter for how to install the Storage

and I/O Blade in the slot.

Refer to the User's Guide of Blade Enclosure for how to install the Blade Enclosure.

IMPORTANT: The Storage and I/O Blade is extremely sensitive to

static electricity. Make sure to touch the metal frame of the Storage and

I/O Blade to discharge static electricity from your body before handling

the Storage and I/O Blade. Do not touch the pins, leads, or circuitry and

place the Storage and I/O Blade directly on the desk. For static notes,

see "Anti-static Measures" in Chapter 9.

Installation Order

Install the Storage and I/O Blade into the slot adjacent to the target CPU blade.

See the description below for installation order.

SIGMABLADE-H

 CPU blade that occupies a single slot

A pair of a CPU blade and a Storage and I/O Blade occupies two slots as shown below.

Slots 1 and 2, slots 3 and 4, slots 5 and 6, or slots 7 and 8

Slots 9 and 10, slots 11 and 12, slots 13 and 14, or slots 15 and 16

Slot

NOTE: A Storage and I/O Blade may be installed in either of the two

slots composing a pair.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 161 162

Sin comentarios

NEC SigmaBlade AD106a Guía de usuario Pagina 37