NEC SigmaBlade AD106a Guía de usuario descargar pdf (Pagina 152)

9-6 Upgrading Your Storage and I/O Blade

INSTALLATION/REMOVAL PROCEDURE

Install or remove the devices in the following procedure.

Mezzanine Card

The Storage and I/O Blade can contain two mezzanine cards for blade. To install a mezzanine card,

use the mezzanine card slot installed on the CPU unit.

IMPORTANT:

 The mezzanine card is extremely sensitive to static electricity. Make

sure to touch the metal frame of the Storage and I/O Blade to

discharge static electricity from your body before handling the

mezzanine card. Do not touch the terminals and parts on the

mezzanine card by a bare hand and place the cards directly on the

desk. For static notes, see the section "Anti-static Measures"

described earlier.

 A combination of boards that can be installed in the Blade Enclosure

is under certain restrictions. Contact your service representative for

details.

NOTE: Some optional mezzanine cards use expansion ROMs on the

boards. Refer to the manual provided with the board to check whether

the expansion ROMs should be expanded. Use the BIOS setup utility

"SETUP" for the setting. See Chapter 4 for details.

Mezzanine slot (Type I)

Mezzanine slot (Type II)

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 161 162

Sin comentarios

NEC SigmaBlade AD106a Guía de usuario Pagina 152