NEC Display Wall Calibrator Guía de usuario descargar pdf (Pagina 60)

60 | NEC DISPLAY WALL CALIBRATOR - USER’S GUIDE

The Input tab is used to set and report the current video input selected on the display, and also the IR Control

setting.

When a single Display is selected the Video Input list shows the current video input being used by the display.

The video input can be changed by selecting the desired input from the list.

When All Displays is selected the Video Input list does not show the current video input. The video input can be

changed for all of the displays in the project by selecting the desired input from the list and clicking the Update

button.

IR Control selects the mode for using the infra-red remote control to control multiple displays when using an

RS232 daisy chain between displays.

When Normal is selected, the monitor will be controlled normally by IR remote controller.

Select Primary on the rst display in an RS232 daisy chain conguration to use it as the IR Receiver for all of

the displays. Select all of the other displays on the daisy chain to Secondary. The Primary display will forward IR

commands received from the sensor to the other displays via RS232.

Select Lock to prevent operation of the IR remote receiver.

Display Settings dialog - Input tab

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 91 92

Sin comentarios

NEC Display Wall Calibrator Guía de usuario Pagina 60