NEC Display Wall Calibrator Guía de usuario descargar pdf (Pagina 46)

Preferences dialog - Calibration tab

Calibration and Prole Steps - Selects the number of measurement steps to take when calibrating the display. A larger

number of steps will generally result in a more accurate grayscale calibration, but will increase the calibration time. 16

steps is the recommended setting for most applications.

Note: The Calibration and Prole Steps selection will not be available if the current Calibration Method is set to Use RGB

Gains.

Intensity Adjustment - Sets how a particular Intensity value is achieved during the calibration process if necessary.

Options are:

• Use Brightness Control - The Brightness control on the display is used if necessary to achieve the target

Intensity. This will provide the best possible Contrast Ratio and also lowest power consumption (assuming

the target Intensity used results in the brightness control being reduced from maximum). Adjusting the

Brightness control can increase the calibration time slightly, and the Intensity may drift slightly after being

adjusted. Because the range of the Brightness control is limited, any additional adjustments necessary to

achieve the target Intensity are done using the internal LUTs.

• Leave Brightness Control at Maximum - The Brightness control on the display is set to the maximum

value and any adjustments necessary to achieve the target Intensity are done using the internal LUTs. This

may give a slightly lower calibrated Contrast Ratio, and the display power consumption will always highest.

The calibration time is fastest for this method.

• Do not adjust Brightness Control - The Brightness control on the display will not be adjusted from the

current setting. Any adjustments necessary to achieve the target Intensity are done using the internal LUTs

if possible. This option allows the Brightness to be manually adjusted before calibration if necessary. Since

the Brightness control is not adjusted, the Intensity can not be increased if necessary during calibration.

46 | NEC DISPLAY WALL CALIBRATOR - USER’S GUIDE

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 91 92

Sin comentarios

NEC Display Wall Calibrator Guía de usuario Pagina 46