NEC Display Wall Calibrator Guía de usuario descargar pdf (Pagina 25)

25 | NEC DISPLAY WALL CALIBRATOR - USER’S GUIDE

Example: Direct Multi IP LAN

Supported display connection congurations

LAN1 LAN2

RS-232C

RS-232C IN, LAN 1 and LAN2

RS-232C

OUT

LAN

RS-232C IN, OUT, and LAN

In this example, the host PC and each display are individually connected to the LAN via hub. Each display has a unique

IP address.

Important: Models with only one LAN connection must be congured to use LAN as the EXTERNAL CONTROL on the OSD.

Models with two LAN connections do not have this setting.

The software is congured with the IP address and MONITOR ID of each display.

The Monitor ID of each display does not need to be unique since the displays are not daisy-chained, however the ID set

on the OSD must match that set in the software.

LAN

ID 1

LAN

IP 192.168.0.1

Display 1

ID 1

LAN

IP 192.168.0.2

Display 2

ID 1

LAN

IP 192.168.0.3

Display 3

ID 1

LAN

IP 192.168.0.4

Display 4

IP 192.168.0.200

LAN HUB

The following image shows how this layout looks in the Summary window when congured.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 91 92

Sin comentarios

NEC Display Wall Calibrator Guía de usuario Pagina 25