NEC Express5800/R120f-1M Guía de instalación descargar pdf (Pagina 150)

4. Setting Up Windows Server 2012

Express5800/R120f-1M, R120f-2M Installation Guide (Windows)

150

Chapter 1 Installing Windows

(2) When using

N8104-150/151/152

When using N8104-150/151/152 with the server, follow the procedure below to set it.

1. Insert EXPRESSBUILDER DVD into the optical disk drive.

If Autorun Menu appears, close the menu.

Tips

EXPRESSBUILDER DVD

is unnecessary if Starter Pack was installed from

Internal Flash Memory. Proceed to the next step.

2. Double-click pgdyavd_disable.vbs in the following folder.

When using EXPRESSBUILDER DVD:

EXPRESSBUILDER DVD:\007\win\winnt\ws2012\lan\bcom\ws2012x64\lan

If Starter Pack was installed from Internal Flash Memory:

System drive:\StartPKG\ws2012\lan\bcom\ws2012x64\lan

3. When the following message appears, click OK.

Tips

The message “Action:Non” indicates that the LAN driver is already set.

4. Eject EXPRESSBUILDER DVD from the optical disk drive, and then restart the system.

Setup is now completed.

4.5.3

Using InfiniBand board (N8104-146/147)

The driver for InfiniBand board (N8104-146/147) is installed automatically when Starter Pack is installed from

EXPRESSBUILDER.

If you have installed an OS with EXPRESSBUILDER, Starter Pack is already applied. Thus, you need not install

the driver for InfiniBand board separately.

To install the driver for InfiniBand board separately, refer to the manual that comes with the board.

Important

If the driver for InfiniBand board is installed or Starter Pack is installed after the

installation of Windows Server 2012

, the device connected to InfiniBand board

(N8104-146/147) is disabled. In this case, enable the system device Mellanox

ConnectX-3 VPI (MT04099) Network Adapter in Device Manager.

Configuration Completed

[Option:PopUp RLV Disabled(Action:Done

)]

Reboot the system

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 343 344

Sin comentarios

NEC Express5800/R120f-1M Guía de instalación Pagina 150