NEC Express5800/320Lb Linux Guía de usuario descargar pdf (Pagina 285)

System Upgrade 8-47

N8104-103 1000BASE-T Adapter

Consult your sales personnel for details when purchasing this hardware.

IMPORTANT: Note the following about this product:

 It is advisable to add this product to such environment that each system is used for a different

purpose (ex. system line, maintenance, monitoring) and multiple accesses do not occur

simultaneously.

 If there are multiple accesses, the processing power and transmission speed may be somewhat

affected.

 For LAN cable’s connector, use the RJ-45 connector which is compliant with IEC8877

standard. Using a different connector may make it difficult to remove the connector.

 This product may require the revision of software and hardware in some cases. Ask your

sales agent.

 Slots to install the board

PCI slot

Group 1 Group 2

N code Name

#1 #2 #3 #1 #2 #3

Remarks

N8104-103 1000BASE-T Adapter –

√ √

–

√ √

Each PCI module

can contain one

board only.

√: Can be installed. –: Cannot be installed.

 About network setting

Make settings of the network after installing the N8104-103 1000BASE-T connection

board and starting the system. For the setting procedure, see “Configure expanded LAN

board” described later, or “Set Dual LAN Card Configuration” in the separate volume of

User’s Guide (Setup).

IMPORTANT:

 Insert the N8104-103 1000BASE-T connection board after the installation of OS is

completed. Use the N8104-103 1000BASE-T connection board in pairs. Insert one

into a slot in a PCI module and the other into the slot at the same location in the other

PCI module.

 The 1000BASE-T (N8104-103) and the 1000BASE-SX (N8104-84) cannot coexist.

1 2 ... 280 281 282 283 284 285 286 287 288 289 290 ... 295 296

Sin comentarios

NEC Express5800/320Lb Linux Guía de usuario Pagina 285