NEC Express5800/320Lb Linux Guía de usuario descargar pdf (Pagina 258)

8-20 System Upgrade

Installing DIMM

Follow the procedure below to install the DIMM. Make sure to power off the server before starting

installation except when replacing DIMM.

1. Shutdown OS.

Press the POWER switch to turn off the server.

2. Disconnect power cord from outlet.

3. Remove the CPU module.

4. Check to be sure in which socket you are mounting the DIMM.

5. Remove the connector cover from the socket.

A DIMM connector cover is installed to the open

socket. When the levers on both ends of the

connector are opened, the DIMM connector cover is

unlocked and you can remove the cover.

IMPORTANT: Carefully keep the removed

DIMM connector cover.

6. Insert a DIMM into the DIMM socket straight.

TIPS: Pay attention to the orientation of the

DIMM. The terminal of the DIMM has a cutout to

prevent misinsertion.

After the DIMM is completely inserted into the

socket, the levers are automatically closed.

7. Mount the CPU module.

8. Connect the power cords.

9. Press POWER switch to power on the module.

10. Verify that POST displays no error messages.

If POST displays an error message, take a note on the massage and see the POST error

messages listed in Chapter 7.

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 295 296

Sin comentarios

NEC Express5800/320Lb Linux Guía de usuario Pagina 258