NEC Express5800/R120a-1 Manual de usuario descargar pdf (Pagina 55)

Step 4 In step 2/3, specify the number of

RAID Controller. If Physical Devices of different

ge the

RAID System will be configured. After the Logical

Configuration" Wizard] appears. Now creating the

he configuration. However, the Initialize of

e Logical Drives having been created may not be

ompleted. The progress and result of initializing the

ogical Drives can be checked on the Operation

Physical Devices used by Logical Drives (or the

number of Physical Devices used for data storage)

and the number of Logical Drives created in the

interface types or device type exist, specify the

number of Physical Devices in each type. After the

specification, click [Next].

Step 5 Step 3/3 shows the configuration of the

RAID System to be configured by the Easy

Configuration. To the RAID System according to the

displayed information, click [OK]. To chan

configuration, click [Back].

Step 6 If you click [OK] in step 3/3, then t

Drives are created and the makings of Hot Spares

are completed, [Completing the "Easy

Logical Drives and making Hot Spares is completed.

After the wizard is closed, see the Tree View to

check t

View.

raidcmd

Use "econfig" command.

Step 1

Connect Physical Devices used for Easy Conf

Step 2 Execute "econfig" command.

Step 3 Specify the conditions on Easy Configuration.

In step 1/3, select the RAID Controller to be configured. Enter the RAID Controller number to be configured.

iguration to the RAID Controller at this timing if required.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 117 118

Sin comentarios

NEC Express5800/R120a-1 Manual de usuario Pagina 55