NEC Express5800/R110f-1E Guía de instalación descargar pdf (Pagina 16)

3.3 Requirements for connection between PC for Management and

managed server

Provide an environment in accordance with the connection type to be used.

 LAN connection

- TCP/IP network

Note

• Do not use a cross cable to connect PC for Management and managed server.

• If you use the managed server integrated BMC, LAN port that BMC uses depends on the type of

BMC. Some BMC uses standard LAN port. Other BMC uses a Management LAN Port. There are 2

types of managed servers on that BMC uses standard LAN port to connect with NEC ESMPRO

Manager: one type is permitted to use only LAN1 port, and the other type is permitted to use both

LAN1 and LAN2 ports. See "Appendix D Managed Servers Summary" in "NEC ESMPRO Manager

Ver.6 Setup Guide".

 Modem connection (Only

- Phone line

- Modem

available for BMC connection)

a modem that supports the following functions:

: None

ontrol : Hardware (CTS/RTS)

Use

Baud rate : 19.2Kbps

Data bits : 8bit

Parity

Stop bits : 1bit

Flow c

Note

• Use the modem recommended for NEC Express 5800 series on the managed server.

• Connect the modem to the serial port 2 on the managed server.

- Other Information

When BMC send alert to PC for Management via modem, it is necess

・ Dial-

 Direct connection (Only available for BMC connection)

- RS-232C cross cable

The serial port for direct connection o

ary the following:

up router or PPP server

n ESMPRO server. NEC ESMPRO Manager must be set following

et a same value with a value of BMC configuration on a managed server.

onfiguration is 19.2Kbps.

Parity : None

Stop bits : 1bit

Flow control : Hardware (CTS/RTS)

on OS.

Bits per speed : Be s

The default value of BMC c

Data bits : 8bit

Important

• Do not use an interlink cable.

• Connect RS-232C cross cable to serial port 2 on the managed server.

• Some models of managed servers do not permit use of any RS-232C cross cable other than the

specified one. See Maintenance Guide provided with the server.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 69 70

Comentarios a estos manuales

Sin comentarios

NEC Express5800/R110f-1E Guía de instalación Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Servidores NEC Express5800/R110f-1E