NEC Express5800/320Ma Guía de instalación descargar pdf (Pagina 31)

Installing a Pedestal System 3-1

Chapter 3

Installing a Pedestal System

Before you install the system, make sure that the site has been prepared as described

in the Express5800/320Ma: Site Planning Guide

To install your pedestal system, see Figure 1-2, which identifies the components of a

pedestal system, “Safety Notices” on page 1-5, and “Safety Considerations” on

page 1-6.

Tools required: None

To install the system in a pedestal case

1. Install the modem assembly.

CAUTION

Make sure that the modem is powered off. You can install

the modem assembly if the system is turned off and no

power cords are connected to the system. If you must

install the modem assembly while the system is in

operation, see the Express5800/320Ma: Operation and

Maintenance Guide.

a. At the rear of the system, remove the metal plate from the backplane.

b. Insert the modem assembly into its slot on the backplane, as shown in

Figure 3-1.

c. Secure the modem assembly in place by tightening the thumbscrew.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 75 76

Sin comentarios

NEC Express5800/320Ma Guía de instalación Pagina 31