
CONFIGURATION GUIDE – NEC EXPRESS5800/R110d-1E
NEC Corporation Revision 1.1, August 2011 12
4.2 Internal Drive Configuration
4.2.1 3.5-inch Drive with On-board SATA Controller
Product Name / Description
On-board SATA Controller
4 x SATA ports, RAID 0/1 capable
Internal SATA Cable
1x SATA to 1x SATA, 4 sets
3.5-inch HDD Cage
4 x 3.5-inch hot plug hard drive bays
160GB HDD
1 x 160 GB, 3.5-inch, SATA2, 7,200 rpm
250GB HDD
1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm
2TB HDD
1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm
NOTE:
The on-board SATA RAID controller is not supported on Linux operating systems.
All hard drives within a RAID array should be of the same capacity.
On-board SATA Controller does not support RAID 10 configured with 2TB HDDs.
4.2.2 3.5-inch Drive with RAID 0/1 Controller with 128 MB Cache
Product Name / Description
Storage Controller
Required
RAID Controller (128MB, RAID 0/1)
Promise SuperTrak TX8760T-128
RAID 0/1/10, 128MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s,
SATA 3Gb/s, LP / FH
RAID Battery Backup Unit
for Promise SuperTrak EX8760T and EX8768
Internal SATA Cable
1x mini-SAS to 4x SATA
3.5-inch HDD Cage
4 x 3.5-inch hot plug hard drive bays
160GB HDD
1 x 160 GB, 3.5-inch, SATA2, 7,200 rpm
250GB HDD
1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm
2TB HDD
1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm
NOTE:
All hard drives within a RAID array should be of the same capacity.
Comentarios a estos manuales