NEC Xen Mail CTI Manual de usuario descargar pdf (Pagina 33)

Xen IPK Xen Mail CTI Installation Guide

Remote Access Chapter 3 - 27

Doc. No. 8557 - Release 1.1

June 2004

To install remote access software, continued

1 Clear the “NetWare SPK,” “NetBIOS,” and “WinSock” selections.

2 Select “Modem/Serial” and click “OK.”

3 Follow the on-screen instructions until you reach the Viewer Default

Modem Settings window.

4 When prompted, use one of the following field value sets for setting up

the connection.

Direct connection

• Modem Name: Direct-Connect

• For Q revision Q931 or higher, the direct connect Baud rate is 57,600. For

Q930 or lower, the direct connect Baud rate is 19,200

• ComPort: set the support computer’s serial port that the null-modem cable

uses

Modem connection

• Modem Name: select the applicable modem; if the modem is not listed,

select “Generic High Speed”

• Baud rate: 19200

• ComPort: set the support computer’s serial port that the modem uses

5 If setting up a modem connection, type the phone number used to dial

the host.

6 Complete the on-screen registration information and click “Continue” to

complete the installation.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 103 104

Sin comentarios

NEC Xen Mail CTI Manual de usuario Pagina 33