NEC 2000 IVS Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 156
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
CHAPTER 2 ND-45504 (E)
Page 4 Addendum-001
Revision 2.1 JULY, 1998
2.APPLICATION CIRCUIT CARDS
Table 2-2 shows the functional outline of each application circuit card.
Table 2-1 Functional Outline of Control Circuit Cards(Continued)
CARD NAME
FUNCTIONAL
NAME
FUNCTIONAL OUTLINE
PZ-PW86/
PZ-PW86-A
PWR
Main power supply card.
Input: AC100 V/200 V (50 Hz/60 Hz)
Output:–27 V (8 A), +5 V (8.5 A), CR (30 mA)
One card per PIM.
PZ-PW86(C) PWR
Main power supply card.
Input: AC100 V/200 V (50 Hz/60Hz)
Output: –27 V (4.5 A), +5 V (7.5 A), CR (30 mA), +80 V (110 mA)
One card per PIM.
PZ-PW86(D) PWR
Main power supply card.
Input: AC100 V/200 V (50 Hz/60 Hz)
Output:–27 V (4.5 A), +5 V (7.5 A), CR (30 mA), +80 V (110 mA)
One card per PIM.
Table 2-2 Functional Outline of Application Circuit Cards
CARD NAME
FUNCTIONAL
NAME
FUNCTIONAL OUTLINE
PN-AP00-A AP00
Application Processor card.
This card is equipped with four RS-232C ports, and is used for SMDR, H/M Print-
er, PMS functions and MCI.
One card per system.
PN-AP01 AP01
Application Processor card.
This card is equipped with one RS-232C port and one Ethernet interface port, and
is used for OAI function. Also, this card is used to expand authorization code and
ACD.
One card per system.
PN-BRTA BRI
Basic Rate (2B+D) Interface Trunk card. (S/T Interface)
This card has one circuit of Basic Rate interface and provides one 2-channel PCM
digital line.
This card is used for BRI trunks from the Telco to the PBX.
PN-2BRTC BRI
Basic Rate (2B+D) Interface Trunk card.
This card has two circuits of Basic Rate interface and provides two 2-channel
PCM digital lines.
This card is used for BRI trunks from the Telco to the PBX.
PN-ME00 EXTMEM
Memory Expansion card.
This card is used with PN-AP00-A card for providing expansion memory.
This card can be equipped with a SRAM card (1MB) as extra SMDR data memo-
ry.
PN-CC00 ETHER
Ethernet Control card.
This card is used with the PN-AP01 card to accommodate the Ethernet, transmit-
ting/receiving a signal of TCP/IP protocol.
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 155 156

Comentarios a estos manuales

Sin comentarios