NEC Express5800/R120d-1E Guía de configuración descargar pdf (Pagina 29)

CONFIGURATION GUIDE – NEC Express5800/R120d-1E

NEC Corporation Revision 4.0 – December 21, 2012 29

4.3 Hot Plug 3.5-inch Drive Configuration

4.3.1 Up to four Drives with Embedded SATA non-RAID Controller

Category

Product Name / Description

Part Number

Storage Controller

Embedded SATA Controller

2x 6Gb/s SATA, 2x 3Gb/s SATA, RAID 0/1/10 capable

(Standard)

Cable

Internal SATA Cable

4 x Single SATA to 1 x mini-SAS

(Standard)

Drive Cage

3.5-inch Hot Plug Drive Cage Kit

4 x 3.5-inch hot plug hard drive bays

(Standard)

Drive

4 slots available

500GB 7.2K Hot Plug 3.5-inch SATA HDD

1x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm

N8150-363

1TB 7.2K Hot Plug 3.5-inch SATA HDD

1x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm

N8150-364

2TB 7.2K Hot Plug 3.5-inch SATA HDD

1x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm

N8150-354

3TB 7.2K Hot Plug 3.5-inch SATA HDD

1x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm

N8150-355

NOTE:

 Embedded SATA RAID controller is supported only on Windows operating systems. An optional RAID

controller is required to configure RAID array for other operating systems.

 Embedded SATA RAID Controller does not support RAID 10 configured with 2 TB and 3 TB HDDs.

 All hard drives within a RAID array should be of the same capacity.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 41 42

Sin comentarios

NEC Express5800/R120d-1E Guía de configuración Pagina 29