
CONFIGURATION GUIDE – NEC EXPRESS5800/R120b-1
NEC Corporation Revision 5.2, September 2011 22
4.2.5 3.5-inch Drives with On-board SATA Controller
Product Name / Description
On-board SATA Controller
4 x SATA ports
Internal SAS/SATA Cable
1 x mini-SAS to 3 x single-SATA
3.5-inch HDD Cage
3 x 3.5-inch hot plug hard drive bays
250GB HDD
1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm
2TB HDD
1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm
NOTE:
On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.
On-board SATA RAID Controller does not support RAID 10 configured with 2TB HDDs.
Hot plug insertion/removal is not supported with the on-board SATA non-RAID controller.
All hard drives within a RAID array should be of the same capacity.
4.2.6 3.5-inch Drives with RAID Controller RAID 0/1/10, 256 MB Cache
Product Name / Description
Storage Controller
Required
RAID Controller (256MB, RAID 0/1)
LSI MegaRAID SAS 9264-8i
RAID 0/1, 256MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 3Gb/s,
LP / FH
RAID Battery Backup Unit
for LSI MegaRAID SAS 9264
Internal SAS/SATA Cable
1 x mini-SAS to 3 x single-SATA
3.5-inch HDD Cage
3 x 3.5-inch hot plug hard drive bays
250GB HDD
1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm
2TB HDD
1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm
NOTE:
All hard drives within a RAID array should be of the same capacity.
Comentarios a estos manuales