NEC Express5800/GT110e-S Guía de configuración Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 35
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
CONFIGRATION GUIDE NEC Express5800/GT110e-S / Air cooling model
NEC Corporation Revision 2.0, November 7, 2012 27
5 Internal Optical Drive
Available Bays: 1
Product Name / Description
Part Number
Slim DVD-ROM drive
(Standard)
Internal DVD Super Multi Drive
Slim DVD Super Multi drive, not including writing software
N8151-104F
NOTE:
To install internal DVD Super Multi drive, the standard DVD-ROM drive needs to be removed.
6 Internal Tape / RDX drives
6.1 Tape / RDX Drive Selection
Refer to the section in accordance with your type of tape drives:
DAT: Refer to 6.2.1
RDX: Refer to 6.2.2
NOTE:
No tape drive can be installed if you install optional 2.5-inch Drive Cage.
Tape devices cannot be directly connected to VMware systems. For VMware systems, it is
recommended to connect and configure an additional backup server via network.
6.2 Tape / RDX Configuration
6.2.1 DAT / USB
Category
Product Name / Description
Part Number
Controller
Internal USB Controller
1 x USB port or 1 x pin-header for front panel USB
(Standard)
Cable
Required
Internal USB Cable
1x Internal USB to 1x USB device
NOTE:
The cable is required to install USB tape drive only.
K410-255(00)
Internal USB Cable
1x pin-header for front panel USB to 1x USB device and 1x front
panel USB port
NOTE:
The cable is required to install internal flash memory and USB
tape drive.
A USB tape drive occupies one front USB port.
K410-245(00)
Drive
1 bay available
Internal DAT (USB)
DDS3 / DDS4 / DAT72, Native capacity 36 GB
NOTE: DDS1 / DDS2 format are not supported
N8151-69
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Comentarios a estos manuales

Sin comentarios