NEC NEAX 2000 IVS Manual de usuario descargar pdf (Pagina 34)

ND-45503 (E) CHAPTER 3

Page 25

Revision 2.0

CHAPTER 3 DATA PROGRAMMING SHEETS

1. GENERAL

This chapter provides the System Data Sheets for programming the Customer Specifications in Chapter 2. For

the programming method and the detailed information on the commands, refer to the Command Manual.

In the Programming sheets, the meanings of markings are as follows:

: Initial Data

With the system data clear command (CM00, CM01), the data with this marking is automatically as-

signed for each command.

In the programming sheets, initial data, which are automatically loaded into the memory after system initializa-

tion, are indicated with “ .” Therefore, the installer should confirm the meaning of initial data, and change or

delete the data, if required.

: System Initialization

After entering the data, a system reset is required (Depress SW1 of the MP card).

: MAT Mode

If there is a abbreviation under the command code designation, then programming can

be accomplished by the MAT mode of programming instead of the MOC mode or CAT mode.

INITIAL

MAT

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 188 189

Sin comentarios

NEC NEAX 2000 IVS Manual de usuario Pagina 34