NEC Express5800/R120f-1M Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 26
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
fwup
[Overview]
Updates the RAID Controller firmware.
[Format]
raidcmd
fwup c=
<controller> -f=<firmware image filepath> [-ocr={yes|no}]
Command Parameter
Description
-c=<controller>
Specify a RAID Controller you want to update.
<controller>: The RAID Controller number
-f=<firmware image filepath>
Specify an absolute path to the image file you want to update.
<firmware image filepath>: An absolute path to image file of firmware
[-ocr={yes|no}]
Specify whether a RAID Controller is reset on-line after a firmware update.
yes : Reset on-line.
no : Not reset on-line.
You can update RAID Controller firmware without rebooting a system when you
specify yes. If you omit to specify the ocr parameter, no
is selected by
default.
[Description]
Updates firmware of the specified RAID Controller. For details, see "Updating firmware of the RAID Controller" of
"Universal RAID Utility User's Guide".
[Condition]
This command can be executed only in the Advanced Mode.
6
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 25 26

Comentarios a estos manuales

Sin comentarios