NEC MultiSync GT2000 Manual de usuario descargar pdf (Pagina 30)

E-30

Connecting Multiple Projectors

As many as 64 projectors can be connected together and controlled by the same PC. For more information about managing multiple

projectors. See page E-31.

External equipment

(Max.10 units)

RGB interface

(Signal distributor)

To REMOTE2

To RGB/YCbCr input 1

Video Signal

To RGB/YCbCr input 1

To REMOTE 2/PC

To REMOTE 1

To REMOTE 2/PC

To REMOTE 1

To REMOTE 2/PC

To REMOTE 1

To REMOTE 2/PC

To REMOTE 1

Control Cable

* When you connect multiple projectors, a different ID number (from 00 to 64) must be assigned to each. To specify an ID of the

projector, select the [Settings Menu]→[Projector ID] under the main menu and enter the ID number.

* The sync termination must be set at "75Ω". To do this, select the [Settings Menu]→[Sync Termination] under the main menu and

select "75Ω".

* The ID number "1" should be assigned to the projector which is connected with a PC and "64" to the projector which is connected

with the ISS-6020 Switcher.

* When connecting the ISS-6020 Switcher with a control cable in connection of multiple projectors, connect the ISS-6020 Switcher

to the last projector with an unused REMOTE 1 connector. The ID number of the last projector should be set at 64.

Also you must set the "RS-232C/RS-422" slide switch inside the ISS-6020 system control module to "RS-422".

RS232C Cable

ID=01

ID=02

ID=63

ID=64

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 86 87

Sin comentarios

NEC MultiSync GT2000 Manual de usuario Pagina 30